Details of a standard cuplock system scaffold
Implementation of the demolition in the construction industry requires system support, maintenance and repair work is obvious. One of the best Australian hierarchy is used Cuplock system, which relies on two cups instead of wedges, nuts and bolts node. It provides fast, complexity and simplify system commissioning and project work in this area. It provides a top cup through reliable, secure and ensure that the joint stiffness up to four levels at a time of a quick solution.
This type of construction is easy to set up and dismantle, do not leave any loose ends, requires very little maintenance and use, such as nuts, bolts, and wedge any components. This is the best access or template support, has a high load carrying capacity, albeit fairly lightweight. Variegated components of scaffold systems are listed below:
1. Standard / Vertical cuplock
It has a regular cup from the joint; captivity mobile top cups for adverse conditions faced by the website. Internal links journal standards in the vertical direction (at the top).
2. GL / horizontal cuplock
It has at the ends, which can be found at the end of a standard cup, but by the relevant top cup is fastened forged steel blade.
3. cuplock beam
Each piece from the perspective of the double structure is linked to the back of each other. Manufacturing, with drop forged blades are placed at the ends.
4. cuplock Omega beams
The product is manufactured by bending both sides extend flange portion and the steel strip supporting the working platform applications found together.
5. cuplock intermediate beam
When it is used in the example, is greater than the distance between the standard length of the plate above.
6. The Board of Directors internal beam cuplock
7. cuplock return beam
It is used to eliminate the gap between the two brackets.
8. Access ladder beams
Connected to the bay ledger, the assembly is used to create the amount of space required in the Gulf Place the ladder.
9. cuplock care
10. cuplock cantilever
It is equipped with a standard general ledger blade and serves as deck and template support assembly secured to the cup at the edge.
11. Beam Bracket
These are posted on the main vertical support beams, in order to avoid individual industries to support the purpose tablet form work.
12. HOP-UP 1/2/3 bracket
This type of stent placement and create forging blade facility in Omega slat section and the pipe section fitted cuplock standards through joint cup.
13. cuplock bridging the horizon
Necessary guardrail on these components so that the bracket vehicle traffic working platform.
14. universal socket
For use with forkheads, socket base and soft top adapter combination, these types screwjacks provide top model can be implemented at the top and bottom of a segmented structure.
15. The socket base
It drilled in order to insert the fastening bolts, if needed, when it is used with universal socket.
16. The jack pine
It is a tool that allows dropheads easily convert from waffle, grooves or metriform support system for use with the scaffold.
Tags: components of scaffold systems, standard cuplock system scaffold, used cuplock system - Post Time: 02-18-16 - By: http://www.gzshuangma.com